This example shows the static analysis of a tensile test sample made of rubber. The dimensions of the sample are shown in the following figure. The thickness of the sample is 1.5mm. Using the symmetry, only 1/8 of the sample is analyzed. After solving the 1/8 model, the results of the full model can be … Continue reading The large deformation analysis of a hyperelastic tensile test sample
Rubber
The stress and deformation analysis of a rubber O ring
In this post, we are going to analyze the stress and deformation of a rubber O ring as shown in the following figure. The rubber O ring is often used for sealing purposes. It may be under large pressure and its deformation is constrained by the sealing groove. Due to the large difference in the … Continue reading The stress and deformation analysis of a rubber O ring
The Analysis of Piston Rubber Film of Pneumatic Brake Device
Fig.1. Typical piston rubber films (with central hole) Fig.2. A typical piston rubber film Fig.3. A typical piston rubber film (edge can be fixed with bolts) Typical piston rubber films in a pneumatic brake device that is commonly used in drilling operations are shown in Fig.1-Fig.3. When the brake device is activated, the piston rubber … Continue reading The Analysis of Piston Rubber Film of Pneumatic Brake Device
The stress-strain curve of rubber material stiffened by carbon fiber
Fig.1. Illustration of the discretization and BCs A 2D model is created. Plane elements and beam elements are used to discretize rubber material and carbon fiber, respectively. To ensure that rubber and carbon fiber deform together (no slipping), plane elements and beam elements share common nodes. A concentrated force (the red arrow in Fig.1) is … Continue reading The stress-strain curve of rubber material stiffened by carbon fiber
Xutao Sun 