We have discussed multiple examples of contact analysis so far. In this post, we are going to investigate a pipe-clamp assembly. By using a pretensioned bolt, the clamp holds the pipe firmly (see the following figure). If the pretension is insufficient, slipping would happen between the pipe and clamp. If the pretension is too large, … Continue reading Contact Analysis of a Pipe-clamp Assembly
SLOAD
Contact analysis: a bolted flange connection
A typical bolted flange connection (see Fig.1) is modeled in this example. Fig.1. The geometry of the model. Only the 1/4 model is created due to symmetry. The challenges in this example are as follows: Complicated geometry. Applying pretension to bolts. Multiple load steps. Modeling contact. It is worth mentioning that a special element Prentension179 … Continue reading Contact analysis: a bolted flange connection
Xutao Sun 