We talked about calculating J-integral and K1 using XFEM in the last post. XFEM is a powerful method as it eliminates the need to remesh crack-tip regions. However, there are some limitations. For example, material behaviour is assumed to be linearly elastic. The available fracture criteria are valid only for cracks in homogeneous linear elastic … Continue reading 2D Stationary Crack Analysis: J-integral and Stress Intensity Factor Calculation
Plane element
The Analysis of Piston Rubber Film of Pneumatic Brake Device
Fig.1. Typical piston rubber films (with central hole) Fig.2. A typical piston rubber film Fig.3. A typical piston rubber film (edge can be fixed with bolts) Typical piston rubber films in a pneumatic brake device that is commonly used in drilling operations are shown in Fig.1-Fig.3. When the brake device is activated, the piston rubber … Continue reading The Analysis of Piston Rubber Film of Pneumatic Brake Device
The stress analysis of eccentric-wear casing
Fig. 1. As shown in Fig.1, the outer ring is the casing, and the middle is the drill pipe. The unworn part of the casing is going to be analyzed. The diameter of the drill pipe is 127mm. the outer diameter of the casing is 177.8mm, and the thickness of the casing is 13.72mm. The … Continue reading The stress analysis of eccentric-wear casing
Xutao Sun 