In this post, we are going to do a nonlinear buckling analysis for a thin arch shell under uniformly distributed pressure. The configuration of the arch shell is as follows During the analysis, a linear buckling analysis will be conducted first to obtain the 1st-order eigenvalue (i.e. the linear buckling load) and eigenmode (i.e. buckling … Continue reading Nonlinear buckling analysis: considering both large deformation and material nonlinearity
the arc-length method
Torsional limit analysis of a container
Fig.1. A typical container This problem is to analyze the torsional limit of an open container (without lid). It is a typical problem in structural nonlinear buckling analysis. As an alternative to the Newton-Raphson method, the arc-length method will be used. Fig.2. A simplified model of the container body Some assumptions and simplifications in this … Continue reading Torsional limit analysis of a container
Xutao Sun 